A tincture box that’s even a few millimeters off shows it. If it’s too loose, the glass bottle rattles and the dropper bulb gets crushed. If it’s too tight, it scuffs the label or won’t close over the cap. Getting the size and configuration right is the first step to packaging that protects the bottle and sells it.
This guide covers standard box sizes for 15, 30 and 60 ml dropper bottles, the configurations CBD brands use (from single cartons to child-resistant gift sets), and how to choose between stock and custom CBD tincture boxes.
What Are Custom CBD Boxes?
Custom CBD boxes are printed paperboard or rigid boxes made to the exact size of a CBD product, such as a tincture bottle, gummy jar, topical or vape cart, and printed with the brand’s design, product details and required label information. Compared with stock boxes, they fit the product exactly, carry your branding on every panel, and can include inserts, windows or child-resistant features.
CBD Tincture Bottle Sizes
Most CBD tinctures come in glass Boston round dropper bottles. Here are typical bottle dimensions without the dropper cap:
| Bottle size | Diameter | Height (bottle only) |
| 15 ml (0.5 oz) | ~27 mm (1.06 in) | ~64 mm (2.5 in) |
| 30 ml (1 oz) | ~33 mm (1.29 in) | ~79 mm (3.09 in) |
| 60 ml (2 oz) | ~39 mm (1.54 in) | ~94 mm (3.70 in) |
The dropper cap usually adds 20–35 mm to the height, depending on the bulb and pipette. Glass suppliers’ sizes vary, so always measure your own bottle with the dropper fitted.
CBD Tincture Box Sizes Chart
The box’s inside size should be the bottle’s diameter plus 1–2 mm on width and depth, and the assembled height plus 2–3 mm. Typical inside dimensions:
| Bottle | Typical inside box size (W × D × H) | In inches |
| 15 ml | ~29 × 29 × 95 mm | ~1.15 × 1.15 × 3.75 in |
| 30 ml | ~35 × 35 × 112 mm | ~1.4 × 1.4 × 4.4 in |
| 60 ml | ~41 × 41 × 127 mm | ~1.6 × 1.6 × 5.0 in |
| 30 ml + insert | ~45 × 45 × 115 mm | ~1.8 × 1.8 × 4.5 in |
Calculated from typical bottle sizes with a 30 mm dropper. Use these as a starting point and confirm with your own bottle.
How to measure your bottle for a box
- Fit the dropper and cap exactly as it ships.
- Measure the widest diameter (usually the bottle shoulder or the cap).
- Measure the full height from the base to the top of the bulb.
- Add clearance (1–2 mm per side, 2–3 mm on height), or size the box around an insert.
CBD Tincture Box Configurations
| Configuration | What it is | Best for |
| Single tuck-end carton | Slim box, tuck flaps top and bottom | Everyday retail; lowest cost |
| Carton with insert | Box plus a die-cut card that holds the bottle neck or base | Glass protection in shipping and on shelves |
| Window box | Die-cut window, often with clear film | Showing oil color or a bottle label |
| Hanging-tab carton | Extra panel with a peg hole | Peg displays in pharmacies and smoke shops |
| Sleeve and tray | Tray slides out of a printed sleeve | Premium launches and gifts |
| Rigid / magnetic box | Thick board with a lid or magnetic flap | Luxury lines, high-strength tinctures |
| Multi-pack (2–4 bottles) | Wider box with a partition insert | Bundles, “day & night” sets, sample packs |
| Tincture + accessory kit | Cavities for the bottle and a gummy pack, balm or dosing syringe | Starter kits and gift sets |
| Child-resistant carton | Push-and-slide or locking tuck mechanism | Markets and retailers that require or expect CR packaging |
| Display box | Counter box holding 6–12 cartons | Point-of-sale |
Materials and Finishes
- SBS paperboard (around 300–400 gsm): clean white base, sharp printing; the standard for tincture cartons.
- Kraft paperboard: natural look for organic and hemp-forward brands.
- Rigid chipboard: for premium and gift boxes.
- Finishes: soft-touch or matte lamination, foil stamping, embossing and spot UV. One accent finish on the logo keeps the label information easy to read.
- Inserts: die-cut paperboard (recyclable, low cost), molded pulp (plastic-free) or foam (maximum protection for kits).
What to Print on a CBD Tincture Box
The carton often has more room than the bottle label, so use it for the information buyers and retailers look for:
- Brand, product name and bottle size (ml / fl oz)
- Total CBD per bottle and per serving, as labeled on the bottle
- Ingredients and carrier oil
- Batch or lot number and a QR code to the certificate of analysis (COA)
- Suggested use and warnings, as reviewed by your compliance adviser
- Barcode for retail
Don’t print health claims (e.g., “treats anxiety” or “cures pain”). State rules for CBD and hemp labeling vary, and federal hemp rules change from November 12, 2026, so check your requirements before you approve artwork.
Stock Boxes vs Custom CBD Tincture Boxes
| Stock boxes | Custom tincture boxes | |
| Fit | Standard sizes; often loose | Made to your bottle and dropper |
| Branding | Plain, or a sticker label | Printed on every panel, inside too |
| Label space | Limited | Room for COA QR code, batch and warnings |
| Inserts and features | Rarely | Inserts, windows, hanging tabs, CR options |
| Minimum order | Very low | Higher, but price per unit drops with volume |
| Best for | Testing a product, very small batches | Retail launch, wholesale and brand building |
Many brands start with stock boxes and labels, then move to custom tincture boxes once they’re selling through retailers, where shelf presence and label space matter.
How Much Do Custom Tincture Boxes Cost?
Price depends mostly on quantity, box style, inserts, printing coverage and finishes. A simple tuck-end carton is the most affordable; rigid boxes and child-resistant mechanisms cost more. Using one box design across several strengths, with a printed strength band or sticker, keeps costs down.
FAQs
What size box do I need for a 30 ml tincture bottle?
Typically about 35 × 35 × 112 mm inside (1.4 × 1.4 × 4.4 in) for a standard 30 ml Boston round with a dropper. Measure your bottle with the dropper fitted to confirm.
What are custom CBD boxes?
Printed boxes made to the exact size of a CBD product, branded with your design and carrying product and label information.
Do CBD tincture boxes need inserts?
They’re not required, but an insert stops the glass bottle moving and protects the dropper bulb, especially in shipping.
Can I use one box for 15 ml and 30 ml bottles?
Only with an insert sized for each bottle. Otherwise the smaller bottle will move around. Most brands use a separate box size for each bottle size.
Do CBD tincture boxes need to be child-resistant?
It depends on your state and your retailers. See our guide to child-resistant packaging for how CR packaging is defined and tested.
Can I get custom tincture boxes in small quantities?
Yes. Digital printing allows short runs. Our minimum starts at 100 MOQ
Get Custom CBD Tincture Boxes Made to Your Bottle
Send us your bottle size (or a sample), quantity and logo. We’ll recommend the right configuration, size the dieline to your bottle and dropper, and send a free 3D proof.